
Add to Cart
ABB's Advant Fieldbus 100 Digital I O Module 3BSE049110R1 CI869 1.5 Mbit/s
Features and benefits
The AC 100 OPC Server runs in the Connectivity Server and requires the AF 100 hardware interface CI527A installed in the same node as the AC 100 OPC Server. In the other end you use the CI869 to connect to the AC 800M controller network.
Advant Fieldbus 100 redundancy is supported by using two CI869s.
The CI869 is an AC 800M communication interface that connects to the AF 100 field bus through the twisted pair (TWP). The CI869 expansion unit contains the CEX-Bus logic, a communication unit, and a DC/DC converter that supplies the required voltage from +24 V supply through the CEX-Bus. The CI869 can be configured for both redundant cables and redundant communication interfaces.
The CI869 communication interface attached to the AC 800M controller provides connectivity to other AC 800M, AC 160 or a connectivity server over AF 100. An AC 800M controller with the communication interface CI869 behaves as an AF 100 station, receiving data from other AF 100 stations/devices. The CI869 has integrated twisted pair modems. CI869 can also be used in an AC 800M High Integrity system.
General info
Protocol |
ABB's Advant Fieldbus 100 |
Article number |
3BSE049110R1 |
Master or slave |
Slave |
Transmission speed |
1.5 Mbit/s |
Line redundancy |
Yes |
Module redundancy |
Yes |
Hot Swap |
Yes |
Used together with HI Controller |
Yes |
Detailed data
Max units on CEX bus |
12 |
Connector |
Twisted Pair (TWP) |
24 V consumption typ. |
typ 160 mA |
Environmental and certification
Temperature, Operating |
55 °C |
Protection class |
IP20 according to EN60529, IEC 529 |
CE- marking |
Yes |
RoHS compliance |
- |
WEEE compliance |
DIRECTIVE/2012/19/EU |
Dimensions
Height |
185 mm (7.3 in.) |
Width |
59 mm (2.3 in.) |
Depth |
127.5 mm (5.0 in.) |
Weight (including base) |
700 g (1.5 lbs) |