CWY-DO Electric eddy current sensor
System description
• Rail mounting
• cast aluminum housing
• Degree of protection IP67
Technical parameters
| Probe diameter | φ8mm | φ11mm | φ18mm | φ25mm |
| Linear range mm | 2mm | 4mm | 8mm | 10mm |
| Sensitivity | 8V/mm | 4 V/mm | 1.5 V/mm | 0.8V/mm |
| Linear error | ≤±1% |
| Frequency response | 0～10KHz |
| Power supply | DC -24V |
| Environment temperature | Probe temperature -30℃～120℃/ extension cable -30℃～120℃/ proxi-mitor - 30℃～70℃
temperature : -10～65℃,relative humidity : ≤90% |
| Mounting thread | To the order guide |
| Probe cable length | To the order guide |
| System cable length | To the order guide |
Note : the probe mounting brackets have sufficient rigidity to prevent its natural frequency and rigidity caused deformation measurement error .
Order Guide:
| Order No. | Probe specifications A | Thread size B | No screw thread length C | Screw length D | Probe cable / extension cable selection E | Proof requirements F |
| CWY-DO–
Electric eddy current sensor | 1:φ8mm | 1:M10×1.0mm*
n:special requirement |
1:5mm*
2:10mm
3:15mm
4:20mm
n:special requirement |
1:30mm*
2:40mm
3:50mm
4:60mm
n:special requirement |
1:1m+4m metal shielding
2:1m+4m no metal shielding *
3:0.5m+4.5m metal shielding
4:0.5m+4.5m no metal shielding
5:1m+8m metal shielding 6:1m+8m no metal shielding 7:0.5m+8.5m metal shielding
8:0.5m+8.5m no metal shielding | 1:explosion proof
2:no explosion proof* |
| 2:φ11mm | 1:M14×1.5mm*
n:special requirement |
| 3:φ18mm | 1:M25×1.5mm*
n:special requirement |
| 4:φ25mm | 1:M30×2mm*
n:special requirement |
Note : The specific requirements should be provided for special model selection .
